Vanne 3 voies de mélange, à brides, passage droit, DN 100, PN6, kv=160 DR100GFLA

Application and Operation

The DR100GFLA 3-way mixing valve is designed for precise temperature control of water in heating and air conditioning systems where mixing of supply and return water is required. It operates via a rotating plug that regulates the flow ratio between the heat source and the return, thereby maintaining a constant, set supply temperature without needing to adjust boiler or pump output. It can be installed on either the supply or return pipe; its function as a mixing or diverting valve depends solely on the connection configuration.

The medium is water or a water-glycol mixture up to 50%. The valve is approved for operating temperatures ranging from 2 to 130 °C, making it suitable for both low-temperature and traditional systems. The maximum working pressure must not exceed 6 bar (PN6), corresponding to standard conditions in most residential and commercial buildings.

Construction and Reliability

The body is made of GG 20 cast iron (GJL-200), a material offering high resistance to mechanical stress and corrosion in water systems. The surface is protected by a primer coating to prevent rust formation during installation and operation. The connections are flanged with a nominal diameter of DN 100 and an identical outer diameter (100 mm); all three ports are identical, facilitating installation and reducing the risk of installation errors.

The flow characteristic is linear for the bypass and equal-percentage for the main channel, enabling smooth, precise regulation without abrupt flow changes. The Kvs value is 160 m³/h, indicating high capacity with low pressure drop, which is crucial in systems with large circulation loops. Leakage does not exceed 1% of the Kvs value, ensuring minimal leakage even during prolonged operation.

The rotating plug is chrome-plated, providing resistance to sediment buildup and valve jamming. The plug position indicator is clearly visible, facilitating manual control or service diagnostics.

Installation and Operation

The valve has no integrated fittings; it requires direct flanged connection to pipes using bolts and gaskets. The length of each connection is 135 mm, a standard dimension for DN100 flanges. The net weight is 28.8 kg, requiring appropriate handling during installation but not excessive for a standard installation team.

Operation requires a rotary electric actuator (e.g., VMM/M6061 or VRM/M7061) with a torque of 30 Nm. There is no built-in drive; it is designed as an "actuator-ready" unit, offering flexibility in control selection (manual, building automation, etc.).

The manufacturer's warranty is 5 years from the date of production, confirming structural stability and material quality.