Échangeur de plaques brasé à deux passes LC170-130-2S-DN50SS (branchements : 6 brides en acier inoxydable) 0207-1505

Application and Performance in Demanding Conditions

This double-pass plate heat exchanger from the L-line series is a solution designed for installations requiring high performance while maintaining compact dimensions. The unit, designated as model LC170-130-2S, is ideally suited for liquid-to-liquid heating and cooling systems. A key element of its construction is the optimized flow channel geometry, which enables a high heat transfer coefficient while maintaining low flow resistance. This not only increases the overall energy efficiency of the system but also minimizes the risk of fouling inside the channels, a common issue in standard heat exchangers when operating with lower-quality water.

The double-pass design (designation "2S") allows the unit to handle more demanding operating parameters than single-pass versions. This is particularly important in circuits where the temperature difference between the primary and secondary media is large or when flow rates are unstable. This heat exchanger can operate at temperatures up to 230 °C and withstand a working pressure of up to 30 bar, making it suitable even for industrial installations or high-pressure central heating systems.

Construction, Material, and Corrosion Resistance

The entire unit is made of stainless steel, ensuring high corrosion resistance and long service life in harsh chemical environments. The plates are permanently joined together via copper brazing in a vacuum furnace. This process ensures not only microscopic tightness of the construction but also a permanent bond between components, eliminating the risk of leaks caused by vibrations or cyclic temperature changes. As a result, the heat exchanger exhibits high resistance to material fatigue caused by sudden pressure surges (water hammer).

It is worth noting the specific connection features of this model:

• Both sides (primary and secondary) utilize a nominal diameter of DN 50.
• Main connections are implemented via 6 stainless steel flanges, facilitating installation in piping systems with larger diameters and ensuring a robust mechanical connection.
• External threading is also used as a main connection type and for the secondary circuit, providing flexibility during valve installation.

When planning the installation location, the physical dimensions of the unit must be considered: the total height is 688 mm, and the width is 258 mm. These dimensions allow for precise adaptation to available technical spaces without the need for complex structural modifications to cabinets or boiler rooms.

Installation and Operating Conditions

Despite its high thermal power and pressure resistance, the unit features relatively compact dimensions compared to traditional shell-and-tube or plate heat exchangers. This approach allows for space savings in boiler rooms or technical cabinets. The heat exchanger is designed for installation with thermal insulation ("Suitable for insulation: yes"), enabling additional reduction of heat losses or condensation of water vapor on the unit's surface, depending on the direction of media flow.

The installation and potential disassembly process has been simplified by using standard steel flanges instead of large-diameter direct threaded connections (which would be heavy and difficult to handle). Installers will appreciate the fact that the brazed construction does not require regular tightening of bolts or gaskets as in bolted heat exchangers – once installed, the unit is "maintenance-free" regarding mechanical tightness throughout its entire service life. However, appropriate service clearances around the unit must be maintained due to its height (over 68 cm) and the potential need for access to shut-off valves mounted before the flanges.