Regardless of the type of washing machine you install, whether it is front-loading or top-loading, it is necessary to provide the device with water supply. What does this mean? Of course, it is necessary to use the correct connection to the water supply network. And here a strong washing machine hose is crucial. How often should it be replaced and which one should I choose?
Check washing machine hoses at the Onninen wholesaler
How to recognize a damaged washing machine hose?
Damage to the washing machine hose is very easy to recognize. Most often, it starts to leak, so water collects on the floor. Of course, it may turn out that the hose was not damaged, but simply came loose, which also causes leaks. Another characteristic symptom that is visible to the naked eye is a crack, abrasion or visible gaps. It may also turn out that the laundry is still wet or damp right after spinning, which may also indicate that the washing machine hose is not draining water. At the same time, water may remain in the washing machine right after the wash is finished.
Most often, this is caused by a blocked hose. Of course, first you need to check whether the hose to the washing machine is properly connected. Such symptoms may also indicate a failure of the hydrostat or drain pump. Therefore, it is better to check all hypotheses before diagnosing the problem. Damage to the inlet hose may cause problems with the washing machine taking in water, which can be noticed, for example, when the clothes are not washed properly or there are visible remnants of powder or capsules on the clothes. The device may also not start washing at all and immediately show an error.
What diameter should a washing machine hose be?
The drain hose should have a diameter of at least 40 mm. It should not be forgotten that it should be mounted at the end of the sewage pipe and secured so that it does not fall out. At the same time, for larger washing machines, i.e. those with a load of 6 to 12 kg, the diameter of the hose should not be less than 70 mm. When it comes to the inlet hose, manufacturers most often offer 3/4" connectors. The hose should be long enough that it is not tense during operation. Otherwise, it can very quickly become damaged, leak or burst. Remember that when using high-quality washing machine hoses, the need to replace them usually occurs every 5 years.
What position should the washing machine hose be properly placed in?
Every washing machine must discharge dirty water, which is why the correct connection of the hose to the drain is so important. The hose should be attached so that its inlet is directed upwards. The water should drain through a straight pipe, so it cannot be bent. At the same time, you need to check whether it is held firmly in the drain so that it does not fall out during vibration or drainage. The washing machine instruction manual usually contains information on the location of the drain hose. The height varies between 60 and 90 cm, measured from the floor level.
Washing machine hoses at the Onninen wholesaler
The washing machine hose is a critical element because it is responsible for supplying water to the device and draining it to the sewage system. It must therefore be durable and resistant to damage.
In the offer of the Onninen plumbing wholesaler you can find an Onnline washing machine supply hose 3/4" with a 150 cm elbow . The set includes a sling. Pay attention to its durability and flexibility. It is designed to connect an automatic washing machine to a water installation. It is made of high-quality PVC, which ensures maximum resistance to moisture, high temperature, but also the effects of detergents. The maximum working pressure in this case is 60 bar. Thanks to the length of 150 cm, you can connect the washing machine to the water source very easily and quickly.
If you need a longer model, then a good choice may bethe Onnline washing machine supply hose 3/4" with a 200 cm elbow . This model is also made of PVC. It provides full water flow without obstruction. It is ash-gray in color, so it does not disturb the aesthetics of the room, even when visible. Of course, in addition to the supply hose, a drain hose is also needed.
You can choose the Onnline washing machine drain hose 3/4" 300 cm . It is extremely flexible, which increases its durability, but also resistance to mechanical damage, abrasion or high pressure. It allows for easy and quick connection of the washing machine to the sewage drain. The manufacturer has equipped it with a handle that facilitates assembly.