The patency of sewage pipes depends largely on how the owners of houses and apartments take care of their cleanliness. It often happens that numerous contaminants create deposits on the inner walls of the pipes, which leads to their complete clogging. All types of blockages can be effectively removed with the innovative pipe unblocking technique - WUKO. What is hydrodynamic pipe unblocking? Go further and learn more about cleaning sewage pipes.
Check out the plungers at the Onninen wholesaler
What is the WUKO pipe unclogging method?
WUKO is currently one of the most effective methods of pressure cleaning of sewage. It is a method of unclogging sewage, which involves the use of specialist equipment, which supplies water at high pressure, which can reach up to 200 bar. Jet nozzles are introduced into sewage pipes, which, using water at high pressure, break up and flush out any sediments that have stopped in the pipes, e.g.:
- grease on pipe walls,
- sewer stone,
- sand,
- mule,
- leaves.
Virtually all biological waste in the sewage system can be removed using the WUKO sewage unblocking technique. Even advanced installation technology requires regular cleaning to avoid blockages that could lead to more serious problems with the sewage system.
How to properly unclog the sewage system using the WUKO method?
Unclogging pipes using the WUKO technique requires, above all, proper preparation and ensuring safety measures for those responsible for carrying out the pipe unclogging process. When calling weather sewer or other specialists for pipe failures, e.g. due to blockages, the WUKO cleaning technique often turns out to be the only effective method.
In practice, the WUKO pipe pressure cleaning process is as follows:
- To begin with, it is necessary to insert a special nozzle with a high-pressure hose into the pipes where the blockage has occurred.
- Then, a WUKO vehicle equipped with pressure pipe unblocking equipment must be prepared on site. The water tank should be 100% filled and the nozzles should be properly positioned in the sewage system.
- The next step is to set the optimal water pressure and select a head with a nozzle adapted to the type of dirt in the sewage system.
- Then simply turn on the WUKO pump and the high-pressure water will begin cleaning the clogged sewer pipes.
Finally, after the work of pushing WUKO pipes is finished, it is worth conducting an inspection. Using inspection cameras, e.g. thermal imaging cameras, you can assess how effectively the pipe cleaning was carried out using the WUKO technique and whether the process needs to be repeated, e.g. with higher water pressure.
It is worth noting that WUKO is safe even in places where plastic installations have been used. The key is to adjust the appropriate pressure that will remove blockages and dirt, but at the same time will not damage the plastic pipes.
Is it really worth always using the WUKO method?
If the sewage pipe is completely clogged and there is no flow in it, then it is worth deciding on WUKO pipe unclogging. In terms of maintaining the sewage system in proper condition, this is probably the best way to quickly get rid of blockage problems.
The key advantages of pipe unblocking services provided by WUKO are:
- the ability to clean single pipes as well as entire sewer risers,
- the unclogging technique is universal and adapted to different types of contamination – in this case, different pressure heads are used,
- high level of operational efficiency,
- the ability to unclog hard-to-reach pipes,
- high level of effectiveness.
In addition, WUKO pipe unblocking is a 100% ecological solution. In this case, only high-pressure water is used to clean the sewage system. This means that the pipe unblocking technique with WUKO services does not negatively affect the natural environment in any way.