Construction distribution board TD-S/FI 2x16A 4x230V Mennekes Doktorvolt 6862 sockets DV-6862-F

Complete protection for the construction site and the workshop

The TD-S/FI construction distribution board is a ready-to-use distribution device designed for the temporary power supply of power tools, lighting, and machinery on construction sites, in workshops, and during roadworks. A full set of protections and sockets is gathered in a single surface-mounted enclosure - the installer does not need to select or install individual components on-site.

The enclosure, made of technopolymer with dimensions 360 × 250 × 185 mm, accommodates 12 modules in a single row. The front plate is grey RAL 7035, and the rear is black. The door is made of polycarbonate - a material resistant to impact and weather conditions. The EPDM rubber gasket works with steel mounting screws to create a tight construction with an IP44 rating. A PG-16 cable gland is included for the introduction of power cables.

Sockets and power distribution

Mounted on the front panel are:

• 4 single-phase sockets type E (with grounding pin) - French system - each 230 V / 16 A, IP44,
• 2 three-phase power sockets 400 V / 16 A, five-pin (5P), red, IP44.

Next to the sockets is a 3F / 11M / 12 mm² busbar with a complete set of covers. The wiring is made of H07V-K flexible single-core cables with cross-sections of 2,5-6 mm² in yellow-green (ground), blue (neutral), and black (phase) colors.

Electrical protections

Protection against electric shock and faults is provided by:

• Residual current device (RCD) Type A, 40 A / 30 mA, four-pole - protects the entire circuit against indirect contact,
• Two C16 single-pole miniature circuit breakers (10 kA VDE) - protect the 230 V sockets,
• Two C16 three-pole miniature circuit breakers (10 kA VDE) - protect the power sockets.

The rated current is 40 A, operating voltage 230/400 V, and short-circuit capacity ≤10 kA. The simultaneous use factor (RDF) is 0.7, allowing for a realistic estimation of load capacity during partial socket utilization.

Standards and manufacturer quality

Production takes place in a management system certified by TÜV SÜD according to the ISO 9001:2015 standard. The distribution board complies with CE directive requirements, IEC/EN 61439 enclosure standards, as well as regulations regarding power sockets (CEI-23-48/49) and modular equipment (IEC/EN 61009-1, VDE standard for circuit breakers). The enclosure operates correctly at a rated voltage of up to 1000 V.