WALLBOX Mobile charging station 22 kW type 2 Doktorvolt 6214 DV-6214-EV

Flexible electric vehicle charging anywhere

The device enables safe charging for both fully electric and plug-in hybrid vehicles. Powered by alternating current (AC), it offers power from 3,7 to 22 kW, allowing the process to be adapted to the capabilities of the electrical installation - from a standard single-phase socket to a professional industrial connection.

Communication with the vehicle takes place via a Type 2 socket compliant with the IEC 62196-2 standard. This is the European standard used by most electric car manufacturers (BMW, Mercedes, Volkswagen, Audi, Hyundai, Kia, and others). The Mode-3 charging mode ensures full control over the process - the car and the station exchange data, and charging ends automatically once the battery is full or upon detection of an error.

The UV-resistant plastic housing is suitable for outdoor use - in a garage, on a driveway, or in a warehouse hall. Dimensions of 355 × 255 × 125 mm and an ergonomic handle facilitate transport between locations. The CEE 32A 400 V plug with a cable approximately 1 meter long allows connection to any power socket of this type.

Control and operation signaling

The START/STOP button serves as the main switch with built-in LED signaling. The diode informs about the current charging status - standby mode, active process, or a potential communication error with the vehicle. Light pulses allow for situation assessment even from a greater distance.

The intelligent controller manages the entire procedure:

• negotiates the maximum allowable current with the car,
• monitors grid parameters in real time,
• interrupts charging if irregularities are detected (loss of grounding, overheating of contacts, phase imbalance).

Thanks to this, the user does not have to worry about the safety of the installation or the vehicle itself.

Protections and operating conditions

The station contains all necessary protective elements - there is no need to purchase them separately:

Protection	Type / parameter
Overcurrent	C32A circuit breaker
Residual current	Type A RCD + RCM module

The RCM (Residual Current Monitor) module additionally monitors leakage current during the entire charging cycle and reacts faster than a traditional residual current device - particularly important at high power levels and with long cables.

The housing provides an IP44 protection rating, which means resistance to dust (>1 mm) and water splashes from any direction. Operation is possible at temperatures from −20 °C to +50 °C, so the device will perform well both in winter in an unheated garage and in summer on an open property.

Production takes place under the supervision of TÜV SÜD, and the manufacturer's quality system meets the requirements of the ISO 9001:2015 standard. The device bears the CE mark and complies with IEC 61439 (switchgear assemblies) and EN 62196-2 (plugs and socket-outlets for electric vehicles).

For the installer, this means certainty that the station will pass inspection even under strict requirements from a developer or building manager. The end user, in turn, gains a guarantee of safety confirmed by an independent certification body.

The inspection window for 12 modules allows for potential expansion of the internal installation without dismantling the housing - useful when there is a need to add an energy consumption meter or a communication module.