Coaxial cable is undoubtedly one of the most important types of electrical cables. It has an internal geometric axis. Above all, it is also distinguished by the fact that its dimensions are fully controlled. Thanks to this, it is possible to obtain a precise distance between individual conductors. It is worth learning more about it and choosing the highest quality models.
Check coaxial cables at the Onninen wholesaler
Where does coaxial cable come in handy?
Coaxial cable is also referred to as telecommunications cable . It is used to transmit signals that are variable and have low power. It has a wide range of applications in various types of installations, from network, through cable, to antenna and transmission. Coaxial cables and wires have a characteristic structure. They have an electric wire that generates minimal resistance to the electric impulse. It also has internal insulation, e.g. made of polyethylene. Thanks to this structure, it will really work in installations that do not require fast transmission. In addition, it can be used to get rid of interference in the viewed image. It can be used in industrial television or computer networks.
How to ground a coaxial cable?
Grounding a coaxial cable is not complicated at all. First of all, the cable screen should be grounded by connecting it to the lightning protection system. This provides protection against atmospheric overvoltages. The outer insulation must also be removed. Then, the cable mass braid should be wrapped. It is best to use metal tape for this, which is resistant to mechanical damage. You can reach for an alternative solution that will not damage the cover. In such a case, the mast should be grounded, as well as the places where the cables are connected. The mast and the cable ties are connected to each other. You can also attach them to a sheet metal with grounding. At the same time, we remind you that in such a case, each device must be connected with separate cables, which are equipped with a grounding strip.
How to check the signal in a coaxial cable?
Coaxial cables are quite easy to install. Remember not to bend the cable too much. Additionally, the cables should not be too close together. Ideally, they should not be less than 25 cm. After connecting, check the signal in the coaxial cable. First of all, you can use a multimeter. This way, you can be sure that the signal is being transmitted properly at both ends.
All you need to do is set the meter sensitivity knob to the highest value, and then position the antenna so that the meter needle deflection and the sound intensity are higher. The signal strength level must be clear. This applies to both terrestrial and satellite television. The power that is dissipated in the resistance should not be lower than 75 Ohms. In addition, you can also check the antenna signal. All you need to do is turn on the TV and use the channel search function.
Coaxial cables at the Onninen wholesaler
If you are looking for cables for transmitting high-frequency analog signals, the Top Brand BiTSAT757 BLACK LF0501 coaxial cable will work well. . It provides excellent signal quality, but also reduces losses during data transfer. It works in the frequency range from 5 MHz to 2400 MHz. It is suitable for transmitting signals of various frequencies. This cable is equipped with a screen with a braid coverage factor of 77%. It is resistant to UV radiation and can be used in outdoor installations.
The A-Lan trishield RG6 75 Om, 1.02/4.55/7.06 LSOH B2ca 500m RGTec coaxial cable is also worth mentioning. It is characterized by really high quality of workmanship and durability. It can be used in television and broadband installations. It will work well for transmitting signals even over long distances and without worrying about deterioration in quality. The manufacturer has equipped this cable with three layers of shielding. In this way, it is resistant to electromagnetic interference. You don't have to worry about noise either. This is a really great model at an affordable price.
You can also choose the Elpar RG 59 B/U 0.59 75 OM coaxial cable . It can be used to transmit signals in the CCTV system, as well as applications that require data transmission. It is made of high-purity oxygen-free copper. Thanks to this, it is not only mechanically resistant, but you also do not have to worry about signal loss during its transmission.