More and more people are opting for gas heating. It is considered relatively cheap and definitely more ecological than coal heating. However, you have to take care of safety. Here the question arises why the gas pressure sensor plays such an important role.
Check the gas pressure sensors at the Onninen wholesaler
Why is there a gas pressure sensor in the heating boiler?
A gas pressure sensor, like a carbon monoxide sensor, is essential for gas furnaces. Such a product should be placed in the room where the gas furnace is located. In order for the gas boiler to function properly, the correct pressure of the heating medium must be ensured. If pressure is lost or its concentration is lower, the gas furnace may be damaged.
Therefore, a gas pressure sensor is used here to check whether there is no leak or damage to the entire system. It measures the pressure on the burner and at the boiler connection. It checks and then transmits information about the gas pressure, which creates a vacuum in the supply system. The pressure should not normally be higher than 3 bar, because in such a case the furnace will be switched off. If the sensor detects a drop below 1 bar, it may mean a failure of the gas furnace.
How do you know if the gas pressure sensor is damaged?
The sensor should be reliable, but this equipment can also be damaged. In such a case, symptoms appear that indicate a failure. Damaged sensors often turn off the stoves for no reason. Additionally, boiling water may appear in the tap, and the radiators will be cold.
The sensor, not controlling the pressure, will transmit incorrect signals. In addition, there may be pressure leaks or even lack of tightness. The pressure in the furnace may also suddenly increase. A damaged sensor will read the values incorrectly, which in turn will lead to an increase in pressure in the gas furnace.
Where is the gas pressure sensor located in the furnace?
In rooms, there should be a carbon monoxide sensor on the wall. It plays an extremely important role. In the event of an increase and outflow of carbon monoxide, the sensor will make a sound informing about the danger.
It is not without significance that a carbon monoxide sensor is necessary not only if you have a coal furnace, but also a gas furnace. It should be noted that it is best to place it on the wall so that it can quickly take measurements. Returning to the gas sensor in the furnace, it is most often located in the very center of the furnace. Most often, three wires come out of it, which measure the increase and decrease in pressure.
Of course, they operate in automatic mode and immediately after a deviation occurs, the furnace is switched off. The controller analyses the draft and then switches the device off. In every gas installation, in addition to the use of sensors, carbon monoxide sensors are necessary. Battery-powered ones will work well. They measure whether the concentration of CO2 in the air is not too high.
Gas pressure sensors at the Onninen wholesaler
It is worth choosing a gas pressure sensor in the Onninen wholesaler. The De Dietrich C 230 Eco 3 + 4-part gas pressure sensor 100011031 is worth noting. It is an extremely important part of the entire heating system. Thanks to it, the gas installation works properly. You also gain confidence that the boiler is working efficiently, which in turn translates into lower gas consumption. The sensor also checks whether the stabilization of combustion processes is taking place correctly. If an anomaly occurs, a quick reaction prevents further damage, which may occur in the reducer, but also concern a technical failure of the entire system.
A good choice may also be the Wolf 10mbar gas pressure sensor with cable 8612071. Despite its low price, it works really effectively. It provides effective measurements, even in difficult conditions. The maximum pressure in this case is 150 bar. Of course, the product has European certification, so it meets the most stringent quality standards.
It is worth choosing the De Dietrich C 230 Eco 5 + 6-element gas pressure sensor 100011034c . This model has a specially designed construction. Thanks to this, it is resistant to changing operating conditions, as well as environments. Even during intensive use, it is reliable. It is compatible with the Eco series of boilers. It extends the correct operation of the furnace and prevents its damage or the leakage of the heating medium in the rooms.