Automatic power switch 4‑pole 400 A HIC440G

from 1 pcs19 605,93 zł
gross / pcs
delivery 23 days
z 2 pcs
z 2 pcs
Brand HAGER
Onninen Index:CVF219
Manufacturer's code:HIC440G
EAN:3250613131814
Bulk packaging:1 / 8 pcs


Suggested products


TECHNICAL DATA

Sales unit dimensions and weight: 1 pcs

length/width/height/weight/volume:0,378 m / 0,239 m / 0,244 m / 11,17 kg / 0,022 m3
Customs code:85365080

Automatic power switch 4‑pole 400 A HIC440G

Motor‑driven power transfer switch – solution for critical circuits

This device is not a simple disconnect – it is an automatic power transfer switch with an integrated motor drive, designed for safe and reliable switching of load between two power sources, e.g., the grid and a generator. It operates in a 3‑position mode (I–0–II), allowing physical isolation of the circuit in the “0” position – essential during service or fault conditions. It is not an uninterrupted‑power switch: a brief power interruption occurs during transfer, which is the trade‑off you pay for safety and compliance with standards.

For the installer – a design that works

Installation is straightforward: the unit mounts on a mounting plate inside the distribution board, without the need for a DIN rail. The main contacts are connected via cable terminals – there are no rigid bars or special wiring. The built‑in motor drive operates automatically and is not optional – it is a permanent part of the device. You can also operate it manually using the emergency‑stop button, providing full control even when no control voltage is present. A locking mechanism prevents accidental switching and can be further secured with a key if required by safety procedures.

The only auxiliary (normally‑closed) contact is used for status indication – e.g., to connect a pilot lamp showing which source is active. The absence of a voltage trigger means it does not react to voltage drops on its own – its operation is controlled by an external unit (e.g., an ATS controller). Protection class IP00 indicates no front‑side enclosure, so do not install it where it could be exposed to dust, moisture, or contact.

For the end user – safety and compliance

This unit serves as a main disconnect, safety, and maintenance switch all in one housing. It is not an emergency‑stop device (it lacks a “STOP” function), but its construction allows rapid circuit isolation manually or via control signals. A making capacity of 263 kW at 400 V and a short‑circuit current rating of 50 kA enable it to safely handle large industrial or commercial loads: offices, production halls, backup systems for hospitals or data centers.

Note: although the device is rated at 180 kW for AC-23 (motors), its making capacity is 263 kW – meaning it can safely energize loads with higher inrush currents (e.g., pumps, fans). Continuous current is 400 A and short‑circuit withstand is 15 kA, guaranteeing stability even with large current surges.

There is no electronics for power‑quality monitoring – it is a purely mechanical switch with a motor drive, requiring no voltage or frequency setting. Its sole function is to transfer between two sources, and it does so very well.


CERTIFICATES, APPROVALS, SAFETY, COMPLIANCE AND WARNINGS

EC Declaration of Conformity



SIMILAR PRODUCTS / OTHER SIZES


from 1 pcs19 605,93 zł
gross / pcs
delivery 23 days
z 2 pcs
z 2 pcs