ABS diffuser with "Spot" design grille 120x120 without locklift, system 125 48220

Drain outlet cover with grille design "Spot" – compatible with system 125

The outlet cover is made of ABS with a V2A stainless steel frame, designed for installation in system 125 – compatible with Practicus, Ecoguss, Giro, and Ultraflat drains. The grille edges feature the "Spot" pattern, which not only enhances aesthetics but also facilitates cleaning – dirt does not accumulate in deep grooves.

The grille measures 120×120 mm and is equipped with guides for the pipe opening, enabling precise alignment with the drain pipe during installation. The mounting is lock-free – there is no Lock & Lift system, resulting in a simpler construction and fewer components prone to failure.

The load capacity of the grille is 2.94 kN, corresponding to class K3 according to EN 1253 – sufficient for loads in domestic showers, bathrooms, and areas with moderate pedestrian traffic. It is not intended for intensive commercial use (e.g., pools, halls), but safely supports the weight of people and light equipment.

The stainless steel frame ensures durability and corrosion resistance – even with constant contact with water and cleaning agents. The ABS material used for the cover is impact-resistant and does not change color under UV exposure.

All components are designed to function as a single unit with the system 125 drain – no additional gaskets or modifications are required during installation. Simply insert it into the opening and secure the pipe through the guides.

No adhesive or sealing compounds are needed during installation – if sealing between the floor and the drain is required, this must be done separately (e.g., using sealing tape or polyurethane compound).