DC-UP-PRO 300 12/24V noise-free voltage converter 4ZDCUP3000

Converter that operates quietly and stably – without interfering with sensitive devices

This is not a standard voltage converter. The DC-UP-PRO 300 converter was designed to avoid affecting other systems in the vehicle – it neither interferes with radio systems nor causes fluctuations in electronic circuits. It operates silently, without noise or pulses, making it an ideal choice for powering projectors, LED panels, GSM systems, or other devices sensitive to network "noise".

In automotive installations, where battery voltage drops under load (e.g., during engine start-up), this converter maintains a stable 24V output – even when the input drops to 9.5V. There are no "voltage surges" or "drops" that could damage expensive components. Protection functions operate automatically: if the output voltage exceeds 30V, the converter shuts down; if it falls below 18V, it also shuts down. This is not just protection – it is precise control.

For the installer: simple mounting and low operating temperature

Installation requires only two wires: positive and negative. No additional fuses or filters are needed – the converter handles noise filtering internally. Dimensions of 122x82x48 mm allow installation even in tight spaces – under the dashboard, behind panels, or within a controller enclosure. It does not heat up significantly under load – thanks to optimized construction and modern components, the operating temperature remains within 0–40°C, ensuring longer service life and eliminating the need for ventilation.

For the user: no need to worry about "noise" or failure

If your vehicle is equipped with an audio system, GPS, reverse camera, or telecommunication module – this converter will not introduce any interference. There will be no "whine" in the speakers, and no disruption of data transmission via CAN-BUS. Continuous operation at 15A (~300W) is standard – this is not a device designed for short pulses. It can safely power devices requiring stable 24V: from LED panels to diagnostic modules or navigation systems.

Weighing only 0.3 kg – it does not burden the vehicle structure. There are no heat sinks or fans. This is pure electronics – simple, effective, and safe.