Overcurrent circuit breaker, 1P, C characteristic, 0.5A, 6kA, AC | S201-C0.5 2CDS251001R0984

Single-pole circuit breaker, with C characteristic and a rated current of 0.5A, is an element used to protect electrical installations against overloads and short circuits. The use of characteristic C means that the circuit breaker reacts with a delay to short-term current surges, which is particularly important in circuits with receivers with high inrush current – such as motors or transformers.

This model, with a width of 1 module, is used in home, commercial and industrial installations. Its compact dimensions (installation depth 69 mm) allow for easy mounting on a DIN rail. The circuit breaker provides protection up to 6kA at a voltage of 230/400V AC, which guarantees effective disconnection of the circuit in the event of a failure.

• Overload and short circuit protection: Ensures the safety of the installation and connected devices.
• C characteristic: Ideal for circuits with receivers with high inrush current – protects against unnecessary tripping during short-term voltage surges.
• Compact dimensions: Allow for easy installation even in tight switchboards.
• Rated breaking capacity: 6kA at 230V AC and 400V AC and 10kA according to IEC 60947-2, which ensures high reliability of operation.
• Wide range of wire cross-sections: Supports solid core wires with a cross-section from 0.75 to 35 mm² and stranded wires from 0.75 to 25 mm², providing flexibility when selecting wires.
• Operating temperature: The circuit breaker maintains its properties over a wide range of ambient temperatures, from -25°C to +55°C.

The circuit breaker meets the requirements of IEC EN 60898 and IEC EN 60947-2 standards, which confirms its compliance with European safety standards. The IP20 degree of protection provides protection against finger contact, but does not protect against the effects of water. The device has energy limitation class 3 and surge category III, which proves its resistance to interference in the electrical network. Additionally, the rated impulse withstand voltage Uimp is as high as 4kV.