Manual fire alarm call point OP1 flush-mounted 1 NC + signaling LED 230VAC + hammer OP1-W02-B\10-230-m OP1-W02-B\10-230-M

Manual fire alarm – reliable protection for your installation

The OP1 manual call point is a key element of the fire alarm system, designed for installation in industrial and public buildings. Model OP1-W02-B\10-230-M is a flush-mounted version, equipped with a single pull switch and LED optical signaling powered by 230VAC. The included hammer facilitates the replacement of the fragile element – the glass – after the alarm is triggered.

Construction and functionality

The construction of this call point is based on a solid plastic material, ensuring durability and resistance to mechanical damage. The red housing color guarantees high visibility, and the IP65 protection rating protects against dust and moisture, which is particularly important in harsh industrial conditions. Type B call points require an additional button press after breaking the glass to activate the alarm. The LED signaling informs about the activation of the alarm, allowing for a quick response and evacuation.

Application and compliance with standards

The OP1 call point complies with the PN-EN 54-11 standard, confirming its high quality and reliability. It can be used in various facilities, such as offices, schools, hospitals, production halls or warehouses. Thanks to the possibility of configuring the circuits (normally open NO/normally closed NC or mixed NC/NO), it can be easily integrated with the existing alarm system. For example, NO circuits open after breaking the glass (type A) or pressing the button (type B), while NC circuits close in the same situations. The choice of the appropriate circuit type depends on the specifics of the installation and requires consideration of the selected call point type (A or B).

• Durable housing: Made of high-quality plastic resistant to damage.
• High visibility: Red color makes it easy to locate the call point if needed.
• LED signaling: Provides clear information about alarm activation.
• IP65 protection rating: Guarantees resistance to dust and moisture.
• Compliance with PN-EN 54-11 standard: Confirms the safety and reliability of the device.
• Easy installation: Designed for flush mounting, providing an aesthetic look of the installation.
• Hammer included: Facilitates glass replacement after the alarm is triggered.

The rated insulation voltage is 500 V, and the continuous rated current is 10 A. The AC-15 switching rated current is 2.5 A (at 230V) and 1.6 A (at 400/500V), while the DC-13 switching rated current is 4 A (at 24V), 1 A (at 110V) and 0.25 A (at 220V). The protection rating is IP65, and the permissible cross-section of connection wires is 2 x 1…2.5 mm² for solid wires and 2 x 0.75…1.5 mm² for stranded wires.

Remember to select the correct current circuits and the type of button (A or B) depending on the specifics of the alarm installation. If in doubt, consult a fire protection specialist.