Coalescing separator KPE 06 - polyethylene, max. throughput 6 l/s, PE nozzles - AQUAFIX 10PE 383506

Protection of Industrial and Municipal Wastewater

The KPE 06 polyethylene coalescing separator is a device designed for the effective separation of mineral oils and organic fats from rainwater and process water. The unit features a maximum throughput of 6 l/s, enabling it to serve installations with moderate flow rates, such as car washes, gas stations, and catering facilities. Thanks to the use of PE (polyethylene) for the tank and nozzles, the construction is resistant to chemical corrosion and harsh soil conditions, which is crucial for installation both indoors and underground outdoors.

Construction and Practical Application

The primary function of this separator is to retain petroleum-based substances before they enter the sewage network. This process occurs through the phenomenon of coalescence – small oil droplets merge into larger clusters that rise to the water surface. The device has dimensions allowing installation in areas with limited space: the height is 1040 mm, while the length and width are 1810 mm and 1200 mm, respectively. The total weight is approximately 149 kg, facilitating transport and handling during installation by the installation team.

Special attention should be paid to the mechanical strength of the cover, which is adapted to a load of 400 kN. This means the separator can be safely installed under roads for heavy vehicles or in traffic zones without risk of structural damage to the device. The nozzles made of polyethylene (AQUAFIX 10PE system) ensure joint tightness and resistance to temperature fluctuations and stresses resulting from ground settlement.

Key Operational Features

The device has been designed to minimize maintenance costs and ensure long-term reliability:

• Universal Application: Suitable for removing both mineral oils (e.g., fuels, lubricants) and organic fats (e.g., waste from industrial kitchens).
• Durable Construction: Polyethylene tanks do not rust and are resistant to aggressive chemical substances present in wastewater.
• Easy Installation: Standard dimensions and relatively low self-weight (approx. 149 kg) facilitate earthworks and installation without the need for heavy-duty lifting equipment (depending on site conditions).
• Traffic Safety: A cover with a strength of 400 kN allows installation in zones traversed by trucks or construction machinery.

Thanks to this solution, installers can expect compliance with environmental requirements regarding wastewater treatment before discharge into public sewage systems or retention tanks. The device does not require complex automation – its operation is based on the physics of gravitational flow, which translates to a lower risk of mechanical failures compared to active systems. All key technical data, such as the throughput of 6 l/s and the polyethylene construction material, have been taken into account when designing this model for specific operational conditions.